Built-In Programs Mode; Program 01 / Static Colors; Program 02-26 - SHOWTEC Helix S5000 10 IP65 User Manual

Helix S5000 10° IP65

6.6.4. Built-in Programs Mode

In this menu you can set the built-in auto programs.
Press the UP/DOWN buttons to select one of the following options. The selection range is Program 01–
Program 16:
● Program 01
● Program 02–26

6.6.4.1. Program 01 / Static Colors

01) If you have chosen program 01, the display will show:
02) Press the UP/DOWN buttons to select one of the 2 options:
● COLOR
● STROBE
03) Press the SET button to confirm the selection and open the desired submenu.
● If you have chosen COLOR, press the UP/DOWN buttons to select one of the 38 color macros.
Press the SET button to save your settings.
● If you have chosen STROBE, press the UP/DOWN buttons to set the strobe frequency. The
adjustment range is between 0–99, from OFF to high frequency. Press the SET button to save your
settings.
6.6.4.2. Program 02–26
01) If you have chosen one of the programs 02–26, the display will show:
02) Press the UP/DOWN buttons to select one of the 2 options:
● SPEED
● STROBE
03) Press the SET button to confirm the selection and open the desired submenu.
● If you have chosen SPEED, press the UP/DOWN buttons to set the built-in program's speed. The
adjustment range is between 1–100, from slow to fast. Press the SET button to save your settings.
● If you have chosen STROBE, press the UP/DOWN buttons to set the strobe frequency. The
adjustment range is between 0–99, from OFF to high frequency. Press the SET button to save your
settings.
Product code: 43724
You can select one of the static colors. See 6.6.4.1. Program 01
on page 35 for more information
You can select one of the built-in programs. See 6.6.4.2.
Program 02–26 on page 35 for more information
35