Table of Contents
Advertisement
Helix S5000 10° IP65
6.6.6.6. PWM Frequency
In this menu you can set the time which needs to pass before the display turns off, when no buttons are
pressed.
01) Press the UP/DOWN buttons to select 5s, 10s, 20s, 30s or ON (display continuously on).
02) Press the SET button to confirm your choice.
6.6.6.7. DMX Fail
In this menu you can set the device's behavior in case of a DMX failure.
01) Press the UP/DOWN buttons to set the desired DMX Fail option. Select one of the 4 options:
●
OFF: The device will black out the light output
●
HOLD: The device will use last properly received DMX signal, ensuring undisrupted performance
●
MANUAL: The device will switch to Manual mode
●
PROGRAM: The device will run the built-in programs
02) Press the SET button to confirm your choice.
6.6.6.8. DMX Sync
In this menu you can set the Sync behavior of the device, while using multiple Helixes.
01) Press the UP/DOWN buttons to set the desired DMX sync option. Choose one of the 2 options:
●
ON: all Helix devices will simultaneously perform the same action, without any delays
●
OFF: risk of random delays
02) Press the SET button to confirm your choice.
Product code: 43724
39
Advertisement
Table of Contents
