Manual Control; Built-In Programs Mode; Sound-Control; Dmx Mode - SHOWTEC LED Par 64 36x3W Product Manual

1. Manual Control

1) Press the MODE button on the device, until the display shows
.
2) With these menus you can manually set the intensity of Red, Green, Blue and the Strobe speed.
Use the UP/Down buttons to change the intensity or the strobe speed.
2. Built-in Programs
1) Press the MODE button on the device, until the display shows
2) With these menus you can set the Auto Mode of the LED Par 64.
3) There are 2 different built-in programs.
Use the UP/Down buttons to change the speed of the program.
3. Sound control Mode
1) Press the MODE button on the device, until the display shows
Turn on the music and the LED Par 64 will react to the beat of the music.
You cannot adjust the sensitivity.

4. DMX Mode

1) Press the MODE button on the device, until the display shows
.
2) In every mode you can choose 512 different DMX addresses.
Use the Up / Down buttons to select the required address from
5. Slave Mode
You can use the same functions on the master device as described on page 12 (Built-in Programs and
Music control).
This means, you can set your desired operation Mode on the master device and all slave devices will
react the same as the master device.
All Slave devices must be set to
Red, from 0 -100%
Green, from 0 -100%
Blue, from 0 -100%
Strobe speed, from slow to fast (0 – 100%)
Color flow effect from fast to slow
Color switch effect from fast to slow
1 Channel

2 Channels

3 Channels
7 Channels
. It will now react the same as its master.
12
, ,
or .
.
, ,
.
or
or