Table of Contents
Advertisement
External Control
Infinite Mode Switch Setup
Connect a MiniSwitch or other external momentary footswitch with a
TRS cable to provide infinite delay repeats on demand, whenever the
switch is held�
NOTE: Your Strymon MiniSwitch's internal jumper switch must be changed
from the factory-default FAV/BOOST Mode to the TAP Mode setting for
Infinite Mode Switch functionality—see
1
Configure the EXP/MIDI jack for Infinite Mode� (See
more info�)
2
Connect an external switch with a TRS cable to the EXP/MIDI jack�
3
To Engage Infinite Mode: Press and hold MiniSwitch to engage infinite
repeats� Release the external footswitch to disengage Infinite mode�
page
19�
OR
page 13
or
pg 21
Advertisement
Table of Contents
