Configuring MultiSwitch Plus for Brig
Configure MultiSwitch Plus for use with Brig for either PRESET Mode
for preset selection or CUSTOM Mode for TAP - FAVORITE - INFINITE
control�
1
Connect a TRS cable to Brig's EXP/MIDI jack�
2
For PRESET Mode - Press and hold the A footswitch on MultiSwitch
Plus while connecting the other end of the TRS cable to any one of
the three jacks� The three LEDs on MultiSwitch Plus will blink
when you release the A footswitch�
For CUSTOM Mode -Press and hold the C footswitch on MultiSwitch
Plus while connecting the other end of the TRS cable into one of the
three jacks� The three LEDs on MultiSwitch Plus will blink
when you release the C footswitch�
OR
GREEN
GREEN
pg 23