Strymon BRIG User Manual page 4

Knobs and Switches
Front Panel Controls
LED INDICATOR
Blinks at the tempo of the delay TIME when the effect is engaged�
Use the FOOTSWITCH to engage and disengage the effect� Also
flashes additional colors when configuring Power Up Mode features
(see
3005
3205 multi
VOICE
R REPEATS
dBucket Delay
p)
The FOOTSWITCH can also be utilized for Tap Mode, as covered on the
next page�
*NOTE: Press and hold the FOOTSWITCH for 3 seconds to enter Save Mode
(see page
(see page
page 9)�
MIX
Controls the delay mix from full dry at
minimum to full wet with no dry signal
at maximum� A 50/50 mix occurs at
approximately 3 o'clock on the knob�
MIX (See
MOD
Adds LFO modulation to the delay time�
MOD
Modulation is off at the minimum setting� The
modulation speed is slow in the first half of the
knob and fast in the second half of the knob,
increasing in intensity as the knob is turned
clockwise�
FOOTSWITCH
Engages and disengages the effect� The
LED on at the top of the pedal indicates that
the effect is engaged�
31), or to configure Expression Pedal parameter assignments
16)�
page 11 for Dry Signal selection�)
RED
pg 4