Configuring The Exp/Midi Jack - Strymon BRIG User Manual

Dbucket delay
Table of Contents

Advertisement

Power Up Modes

Configuring the EXP/MIDI Jack

1
Press and hold the FOOTSWITCH for at least 2 seconds while powering
up Brig� Once the LED flashes RED, release the footswitch�
2
Turn the MIX
panel's EXP/MIDI jack� The LED will change color to indicate the
current status as you turn the knob�
• Expression Pedal Mode:
standard TRS expression pedal, allows continuous control over
any of the knobs� (See
• Favorite Mode:
allows you to recall a Favorite setting� (See
• Tap Mode:
you to tap in a tempo in quarter notes for your delay repeats to
follow� (Also, see the FOOTSWITCH description on
note division options�)
• Infinite Mode:
allows for infinite delay repeats of the input signal—essentially the
same as turning the REPEATS knob to maximum� (See
for configuration details�)
3205
TIME
FILTER
dBucket Delay
hold (tap)
JACK) knob to select the function of the rear
(EXP/MIDI
GREEN
page 16
AMBER
(11 o'clock) - Using a Strymon MiniSwitch,
RED
(12 o'clock) - Using a Strymon MiniSwitch, allows
PURPLE
(2 o'clock) - Using a Strymon MiniSwitch
3005
multi
VOICE
MIX
REPEATS
MOD
(default, minimum) - Using a
for details�)
page 17
(Continued, next page
for details�)
page 4
for
page 19
)
pg 13

Advertisement

Table of Contents
loading

Table of Contents