Midi Functionality; Configuring Brig To Use Midi - Strymon BRIG User Manual

MIDI Functionality

Configuring Brig to Use MIDI

Using MIDI unlocks a set of tools that can be used to load any of Brig's
300 preset locations using a suitable MIDI controller or interface
connected to the Brig EXP/MIDI jack� This requires a Strymon MIDI EXP
cable or a MIDI controller/interface, such as Strymon Conduit, with at
least one quarter-inch output�
NOTE: When using a Strymon MIDI EXP Cable, the MIDI OUT Mode must be
� (See
set to Off page 30
OR
for details�)
pg 26