Strymon BRIG User Manual page 28

Configuring Brig to Use MIDI
STEP 2 – SET MIDI CHANNEL
3 Turn the TIME
channel� The LED indicates status� Your knob selections are as
follows:
• Channel 1:
• Channel 2:
• Channel 3:
• Channel 4-16:
Program Change message, requires 1⁄4" MIDI connection
Once the LED turns BLUE, it will blink until the pedal receives a
MIDI Program Change message� Once a message is received, the
pedal will be set to the MIDI channel that carried the message
and exits the Power Up Mode to allow you to begin using Brig� (If
you've successfully configured MIDI Channel 4-16, you can skip
4
item on the next page�)
TIME
FILTER
hold (tap)
(MIDI CHANNEL) knob to set the MIDI communication
GREEN
(default, minimum)
AMBER (10 o'clock)
RED (12 o'clock)
BLUE
(maximum) - set by next received MIDI
(continued)
3005
3205 multi
VOICE MIX
REPEATS MOD
dBucket Delay
pg 28