Favorite Switch Setup And Compare Mode - Strymon Zelzah User Manual

Zelzah
- Multidimentional Phaser
External Control – Favorite Switch Setup and Compare Mode
Connect MiniSwitch or other external latching footswitch with a TRS
cable to store and recall your favorite setting.
Configure the EXP/MIDI
1
jack for Favorite mode.
(See page 15
Connect an external switch
2
with a TRS cable to the
EXP/MIDI jack.
Dial in your desired sound.
3
To save your sound as
4
the new Favorite setting,
press and hold the ON
(4-STAGE) footswitch for
until the ON (4-STAGE) LED
blinks BLUE. Press the ON
(4-STAGE) footswitch again
to save the Favorite setting.
Step on the external footswitch
to toggle between your Favorite
setting and the current setting on
Zelzah.
COMPARE MODE
With the Favorite engaged, as
a knob or switch is adjusted,
the ON (4-STAGE) LED flashes
GREEN when the current knob or
toggle switch position matches
the setting of the saved Favorite
setting.
for more info.)
INPUT
MONO STEREO
IN OUT L OUT R
NOTE: Along with the knobs
and toggle switches on the
face of the pedal, all Live
Edit settings and the bypass
state of 6-Stage and 4-Stage
are stored with the Favorite
setting. Power Up modes are
not stored with the Favorite
setting.
NOTE: Saving presets works
differently when using MIDI.
(See 28 for more details.)
page
NOTE: The Favorite setting is
stored at MIDI program change
location 0.
USB
OR
pg 19