Volume Mode - Strymon Riverside User Manual

Riverside
- Multistage Drive

Volume Mode

Use a TRS Expression pedal to control the output volume.
Connect the expression pedal to the
1
EXP jack of Riverside.
Set the LEVEL knob to the setting you
2
would like for the highest TOE down
position of the expression pedal.
When the FAVORITE setting is
3
engaged, the highest TOE down
position of the expression pedal will
correspond to the setting that the
LEVEL knob was saved as for the
favorite setting.
NOTE: When Riverside is in Buffered Bypass mode and
the Expression Jack is configured for Volume Mode, the
pedal will still function as a Volume pedal whether the
effect is bypassed or engaged.
®
pg 13