Strymon BRIG User Manual page 30

Configuring Brig to Use MIDI
STEP 3 – SET MIDI OUT MODE
1 Press and hold the footswitch for at least 2 seconds while powering
up Brig� Once the LED flashes RED, release the footswitch�
2 Turn the FILTER
sent from Brig to other MIDI devices� The LED will flash momentarily
to indicate your selection�
• OFF: RED
Brig�
• THRU: BLUE
MIDI Out without any additional MIDI messages generated by Brig�
• SEND CC, OTHER:
messages generated by Brig are sent to the MIDI Out�
• SEND OTHER:
by Brig are sent to the MIDI Out�
3 Press the FOOTSWITCH to store the MIDI Out Mode and exit�
NOTE: MIDI data is sent from the RING of the TRS connection of the EXP/
MIDI jack�
3205
TIME
FILTER
dBucket Delay
hold (tap)
(MIDI OUT) knob to select what kind of MIDI data is
(default, minimum) - No MIDI messages are sent out of
(11 o'clock) - Incoming MIDI messages are sent to the
GREEN
AMBER
(maximum) - Sysex messages generated
(continued)
3005
multi
VOICE MIX
REPEATS MOD
(1 o'clock) - MIDI CC and Sysex
pg 30