Table of Contents
Advertisement
COMPADRE
- Dual Voice Compressor & Boost
Power Up Modes – Bypass Mode
Setting Compadre to Buffered Bypass mode preserves the high
frequency response of your guitar signal through your pedal chain and
long cable runs.
Press and hold the
1
COMP footswitch while
connecting power to
the pedal. Once both
LEDs flash, release the
footswitch.
Turn the COMPRESSION knob to select one of the options below.
2
The COMP LED will change color to indicate the current status
as the knob is turned.
True Bypass:
Auto Bypass:
True Bypass, but forces Buffered Bypass when Volume Pedal
jack is connected
Buffered Bypass:
Press the COMP or BOOST
3
footswitch to store the
bypass mode and begin using
Compadre.
NOTE: Auto and Buffered Bypass allow for the Volume Pedal jack
to operate while the pedal is bypassed.
GREEN
AMBER
(default)
RED
NOTE: Power up modes are
saved unless they are changed
again with the steps above.
pg 7
Advertisement
Table of Contents
