Favorite Switch Setup And Compare Mode - Strymon BRIG User Manual

Dbucket delay
Table of Contents

Advertisement

External Control

Favorite Switch Setup and Compare Mode

Connect MiniSwitch or other external latching footswitch to store and
recall your Favorite setting�
NOTE: Your Strymon MiniSwitch's internal jumper switch must be set to the
factory-default FAV/BOOST Mode setting for Favorite Switch functionality�
If you've changed the setting of this jumper switch, you'll need to change it
back to FAV/BOOST Mode—see
1
Configure the EXP/MIDI jack for Favorite Mode� (See
more info�)
2
Connect your MiniSwitch (or, optionally, an external latching switch
with a TRS cable) to the EXP/MIDI jack�
3
Dial in your desired sound�
4
To save your sound as the new Favorite setting, press and hold the
Brig footswitch for at least 3 seconds, until the LED blinks GREEN�
Then, press and hold the Brig footswitch until the LED lights
save the Favorite setting�
Step on the external footswitch to toggle between your current and
Favorite settings on Brig�
page
19�
OR
page 13
for
BLUE
to
pg 17

Advertisement

Table of Contents
loading

Table of Contents