Onboard Tap Mode - Strymon BRIG User Manual

Dbucket delay
Table of Contents

Advertisement

Knobs and Switches

Onboard Tap Mode

Press and hold the FOOTSWITCH for 1 second to enter/exit Onboard Tap
Mode and tap quarter notes to set your delay time�* The LED will flash
RED
and
BLUE
to indicate the tempo� Maximum tap range is 2 seconds�
The TIME knob sets the TAP DIVISION when in Tap Mode� The TAP
DIVISION options, from minimum to maximum on the TIME knob, are:
TRIPLET,
EIGHTH,
*NOTE: You can optionally configure an external footswitch for External Tap,
Favorite, or Infinite Mode functionality� (See
When using an External Tap Mode switch, you can follow the above
instructions in Onboard Tap Mode to set your TAP DIVISION options—the
current TAP DIVISION setting is utilized for both Onboard and External Tap
Modes� (Also, see
DOTTED EIGHTH, and
TIME
page
20�)
QUARTER note�
page
13�)
pg 5

Advertisement

Table of Contents
loading

Table of Contents