Danfoss VLT 3006 Product Manual page 86

Parameter description
008
Local reversing
(Local fwd / rev)
009
Local jogging
(Local jog)
010
Local reference
(Loc reference)
011
Reset energy counter
(Energy counter)
012
Reset hour counter
(Hour counter)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Value:
Disable (disable)
Enable (enable)
Value:
Disable (disable)
Enable (enable)
Value:
Disable (disable)
Enable (enable)
Value:
No reset (no reset)
Reset (reset)
Value:
No reset (no reset)
Reset (reset)
= Factory setting. Text in ( ) = Display text.
The figures in [ ] are used in bus communication.
®
MG.30.A7.02 - VLT is a registered Danfoss trademark
0.. Operation and display
Function:
Local reversing can be selected/deselec-
[0]
ted via the keyboard. Locally selected or
[1]
Local with external stop: Para. 003.
Warning:
Note: If local rotation direction (param-
eter 008) has been selected, the function
will only be active if reversing via terminal
19 has not been selected (parameter 403).
Function:
Local jogging can be selected/deselected
[0]
[1]
on the keyboard. Local jogging is possible
regardless of choice: Para. 003.
Jog speed: Only as long as the key is kept
in.
Function:
[0] Local speed selection can be selected/
deselected.
[1]
Description of choices:
DISABLE is selected if the possibility of
changing speed with the help of parameter
004 is not required.
Function:
Zero setting of kW hour counter.
[0]
[1] Description of choices:
Reset starts up when DATA MODE is left.
Cannot be selected via the serial bus,
RS485.
Function:
Zero setting of run hour counter.
[0]
Description of choices:
[1]
Reset starts up when DATA MODE is left.
Cannot be selected via the serial bus,
RS485.
85