Danfoss VLT 3006 Product Manual page 34

Example 2:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Connection examples
START/STOP REVERSING, 4-20 mA output signal (0-f
Reference: 4-20 mA ~ 0-100% speed
The following must be programmed:
Function Parameter no.
0-F ~ 4-20 mA
MAX
Ref. 4-20 mA
®
MG.30.A7.02 - VLT is a registered Danfoss trademark
NB: Screen for control cables must be
connected as described in the chapter on
EMC-correct installation.
All settings are based on factory settings,
but motor data (parameters 103-105) must
be set according to the motor connected.
Parameter value
407 F = 4-20 mA
MAX
413 4-20 mA
)
MAX
33