Table of Contents
Advertisement
5 Maintenance
5. 1 Introduction
Maintenance prop
B
D
A
Fig. 62: Transport bracket
A
Fig. 62: Maintenance prop
BA DT05 EN – Edition 2.0 * dt05b510.fm
The working order and the service life of vehicles are heavily dependent
on maintenance.
It is therefore in the interest of the machine owner to perform the manda-
tory maintenance.
Before performing servicing and maintenance, always read, understand,
and follow the instructions given in:
•
Chapter
• The Operator's Manuals of the attachments.
Daily maintenance specified in maintenance plan "A" has to be performed
by an appropriately trained machine operator. All other maintenance may
only be performed by trained and qualified technical personnel.
The maintenance plans indicate when the maintenance mentioned below
must be performed.
C
Proceed as follows to attach the maintenance prop:
Remove the maintenance prop A from the transport bracket
The maintenance prop is fastened with lock pin C and pin D
Insert the maintenance prop A on the tipping cylinder B
Secure the maintenance prop A with the lock pin C and the pin D.
During transport fit maintenance strut A as shown in
strut.
2 "Safety instructions" of this Operator's Manual and
Danger!
Careful when performing maintenance on or under the skip, and
in general when performing maintenance with the skip tilted out
–
Accident hazard!
Use the maintenance prop
Maintenance
Fig. 62
– transport
5-1
Advertisement
Table of Contents
