Maintenance; Periodic Maintenance Schedule; Long-Term Storage - Wacker Neuson BS 30 Operator's Manual

Vibration rammer
Hide thumbs Also See for BS 30:
Table of Contents

Advertisement

6 Maintenance

6
Maintenance
6.1

Periodic Maintenance Schedule

Check fuel level.
Check air filter indicator.
Replace as needed.
Check fuel line and fittings for
cracks or leaks. Replace as
needed.
Tighten ramming shoe
hardware.
Check engine cylinder screws
Check external hardware
Clean engine cooling fins
Clean and check spark plug
gap
Replace spark plug.
Clean recoil starter.
Clean engine muffler and
exhaust port.
Inspect fuel filter.
6.2

Long-Term Storage

1. Drain the fuel from the tank.
2. Start the engine and run it until remaining fuel is used.
3. Remove the spark plug. Pour approximately 30 ml (1 oz.) of clean SAE
4. Pull the starter rope slowly to distribute oil in the engine.
5. Re-install the spark plug.
18
Daily
before
starting
10W30 engine oil into the cylinder through the spark plug opening.
Operator's manual
After
Every
first
week
month
5
or 25
or 100
hours
hours
Every
Every
3
months
or 300
hours
hours
BS 30
Every
Year

Advertisement

Table of Contents
loading

This manual is also suitable for:

0610350

Table of Contents