Ec Declaration Of Conformity Model Dt05-P, For Vehicles With Ce Mark On The Type Label (Up To Series Fb05777) - Wacker Neuson DT05 Operator's Manual

1. 5 EC Declaration of Conformity model DT05-P, for vehicles with CE
mark on the type label (up to series FB05777)
Manufacturer
Messersì, Via Arceviese, 44, 60010 Casine di Ostra, Ancona - Italy
Product
Machine designation
Machine type
Trade name
Serial number
Engine/output kW
Measured sound power level dB(A)
Guaranteed sound power level dB(A)
Conformity assessment procedure
-
Notified body involved in procedure
Vericert SRL
Via L. Masotti, 5
48124 Fornace Zarattini (RA)
EU notification number 1878
Directives and standards
With this document we declare that this product corresponds to the applicable regulations of the
following directives and standards:
2014/30/EU, 2000/14/EC, 97/68/EG, EN ISO 12100:2010;
EN 474-1:2006 (up to 5.5.8.1, 5.8.2, 5.9, 5.19.1), EN 474-6:2010 (up to 5.7.3.3).
Authorized representative for the compilation of technical documentation
Messersì S.p.a.
Via Arceviese, 44
60010 Casine di Ostra,
Ancona - Italy
Casine di Ostra _ _•_ _•_ _ _ _
Marco Vignaroli,
Managing director
The indications specified above correspond to the existing information at time of going to press. Changes may
have been carried out in the meantime (see original declaration of conformity supplied with the vehicle). Valid for
the EU and states with legislation that is similar to that of the EU. Valid for machines with CE mark, which have
not undergone any unauthorized changes since commissioning.
BA DT05 EN – Edition 2.0 * dt05b110.fm
EC Declaration of Conformity
Compact Dumper
D11-02
DT05-P
xxxxxxxx
GX200UT/4.5
97
99
Introduction
1-5