Pepperl+Fuchs VisuNet RM Shell 6 Manual page 55

VisuNet RM Shell 6
Profiles Management App
General Settings
Option
Profile Name
KVM Switch Network
Name / IP address
Username
Password
Port Number/Port Name
Ping server before connect Use the ping mechanism to check whether the device is available
Block user from closing the
connection
Display Settings
Option
Show the connection bar
After configuring the connection profile as desired, click "Apply Changes."
Description
Name of the KVM connection profile that is presented on the
home screen.
Per default the DHCP is enabled. Ensure that you use the follow-
ing Network Name to setup the first connection: kvm.local
Refer to the Raritans manual if you require a static IP.
User name that is stored on the Raritan KVM switch that you want
to connect to.
Default User DKX4-101: admin
Password of the user that is stored on the Raritan KVM switch
that you want to connect to.
Default password DKX4-101: raritan (for user "admin")
This setting can be used on Raritan multi-port KVM-over-IP
switches to select the port number you want to connect to.
before connecting.
This function removes the "Close" function from the connection
bar. Note that this function does not stop the user from closing the
connection via other client mechanisms, e.g., the Raritan client
menu bar.
Description
Enable this option to show the connection bar at the top of the
screen. The connection bar fades out automatically after a few
seconds. It fades in when you move the mouse to the top of the
screen
55