Network Settings - Pepperl+Fuchs VisuNet RM Shell 6 Manual

VisuNet RM Shell 6
Factory Reset
10.4

Network Settings

This section provides general information about the network settings.
Use this option to enable/disable DHCP (Dynamic Host Configuration Protocol). With DHCP,
you can integrate the RM / BTC into an existing network without further manual configuration.
Settings like IP Address, Subnet Mask, Default Gateway, and DNS Server are addressed and
assigned automatically to the RM / BTC. However, you can set up all these parameters manu-
ally by disabling the DHCP option.
Figure 10.10
125