Raritan Kvm Settings - Pepperl+Fuchs VisuNet RM Shell 6 Manual

VisuNet RM Shell 6
Profiles Management App
6.3

Raritan KVM Settings

This section describes the configuration of the KVM-over-IP profile for Raritan KVM-over-IP
switches.
Note
The VisuNet RM Shell 5.2 and newer has been tested and qualified with the Raritan
Dominion® KX IV-101 KVM-over-IP switch that is available as an accessory (DKX4-101;
#70118493). A separate Quick Installation Guide with the configuration steps for the Raritan
Dominion® KX IV-101 KVM-over-IP switch is available online (https://www.pepperl-
fuchs.com/global/en/classid_2547.htm?view=productdetails&prodid=100044#documents).
Note
The KVM-over-IP client requires an VisuNet RM Shell PRO License to be unlocked.
KVM Profile Settings
When the Rartan switch is configured, a new KVM connection profile can be created in VisuNet
RM Shell 5.2 and newer. This profile allows a connection to be established to the host PC that
is connected to the Raritan KVM switch.
Note
Ensure that the Raritan Dominion KVM Switch is configured properly and that the Direct Port
Access (DPA) is enabled before you create a Rartitan KVM profile.
Figure 6.17
54