Pepperl+Fuchs VisuNet RM Shell 6 Manual page 34

VisuNet RM Shell 6
VisuNet RM Shell 6 User Interface
Profile status information is indicated at the bottom-left corner of each profile tile:
Status
Idle
Connection failed
Connecting
Connected
Auto connect
Applications
This section shows all applications. The information and features that are accessible in this
section vary based on the signed-in user role:
User Role
Operator
Configuration View
34
Description
Initial status after a profile has been created
An error occurred while trying to establish a con-
nection (orange line).
Profile is connecting to host (blue line).
Profile is connected to a host PC. A green status
bar at the top of the profile tile is visible (green
line).
If auto connect is enabled, a defined profile con-
nects automatically to a host. The seconds
remaining before the next connection retry are
counted down in the top-right corner of the profile
tile.
Simultaneously, an animated white status bar at
the top of the profile tile is visible.
For more information on auto connect see chapter
6.1
Description
Access to profiles (if not limited by a preconfigured auto connect).
No access to system settings or applications.
Full access to profiles, system settings, applications, and Win-
dows Explorer.