VisuNet RM Shell 6
VisuNet RM Shell 6 User Interface
Enabling and Disabling the UWF
1.
Click the "Power" icon at the top-left corner of the VisuNet RM Shell home screen.
2.
Click on "Protect Disk and Restart" or to enable UWF or "Unprotect Disk and Restart" to disable
UWF.
Figure 4.5
3.
Select Protect Disk and Restart to enable the UWF or Unprotect Disk and Restart to
disable the UWF.
After restart, the change will be in effect. An icon at the top of the home screen indicates
whether the UWF is enabled.
Figure 4.6
36
Need help?
Do you have a question about the VisuNet RM Shell 6 and is the answer not in the manual?