Pepperl+Fuchs VisuNet RM Shell 6 Manual page 22

VisuNet RM Shell 6
VisuNet RM Shell—An Overview
Setup "Network"
All information about the local RM / BTCs network adapter hardware is shown.
You can edit the network adapter name according to your needs.
Use this option to enable/disable "DHCP" (Dynamic Host Configuration Protocol).
With "DHCP", you can integrate the RM / BTC into an existing network without further manual
configuration. Settings like "IP Address", "Subnet Mask", "Default Gateway", and "DNS Server"
are addressed then assigned automatically to the RM / BTC. However, you can set up all these
parameters manually by disabling the "DHCP" option.
Figure 3.10
22