Pepperl+Fuchs VisuNet RM Shell 6 Manual page 164

VisuNet RM Shell 6
How-Tos
6.
Execute the following command to create a new team:
7.
New-IntelNetTeam -TeamMemberNames "<network adapter name 1>", "<network adapter
name 2>" -TeamMode AdapterFaultTolerance -TeamName "<team name>"
8.
Replace <network adapter name 1> and <network adapter name 2> with the names of the
Network Adapters and replace <team name> with the name of the team you want to create.
9.
There are more TeamModes that can be used. See
https://www.intel.com/content/www/us/en/support/articles/000032008/ethernet-products.html.
10.
A new Network Adapter should appear, which can be configured.
Remove Teaming
1.
Execute "Remove-IntelNetTeam -TeamName "<team name>"
164
Note
Typically the relevant Ethernet adapters are named Ethernet or Ethernet 2.