Lifting Arm Speed Control Knob; Double Acting Lever - Kioti DK4210(C)HSE Manual

the position control lever is used to
adjust the height of implements on
the 3-point hitch ends.
the implement attached to the lifting
arm can be lowered by pushing the
lever while the implement is raised
by pulling the lever.
in order to limit the lowering height of
implements, use the lock bolt (2) to
limit the operating range of the lever.
For detailed information, refer to "how
to drive" in chapter 5.
TD210-미국법인향-DK4210,4710,5310,60133 33
liFting arm (lower linK)
speed control Knob
B B
A A
1 1
(1) lowering speed control Knob
(a) high speed (b) low speed
turning the knob counterclockwise
increases the lowering speed while
turning it clockwise decreases the
lowering speed. also, turning it clock-
wise to its end can fix the implement
to a certain position.
note
•
this knob does not control the
lifting speed of the lift arm.
Function description and operating tips

double acting lever

1 1
d21o422a
(1) double acting lever
this lever is used to control a auxiliary
hydraulic implement installed to rear.
see the chapter 5, "how to drive" for
the details.
4
33
-
4
d21o423a
2020-11-18 오후 2:35:08