NX4510/AIX50103VX5510/NX6010
POSITION CONTROL LEVER
A
WARNING
Make sure that there is no-
body or not obstacle around
the three-point linkage before
controlling position lever.
tag oweitaistreem
aat
T hl 0442A
TE10477A
(1) Position Control Lever
(2) Lock Bolt
(1) Lower Link
(A) Lowering
(B) Lifting
The position control lever is used to
keep the plowing depth constant dur-
ing work.
The implement attached to the lifting
arm can be lowered by pushing the
lever while the implement is raised
by pulling the lever.
In order to limit the lowering height of
implements, use the lock bolt (2) to
limit the operating range of the lever.
For detailed information, refer to "Ini-
tial Operation" in Chapter 5.