Advertisement
Available languages
Available languages
Chapter Six Troubleshooting of Power Tiller
Ⅰ. Troubleshooting of Diesel Engine.
Refer to the instruction manual of diesel engine.
Ⅱ. Troubleshooting of Clutch
(Note: do not dismount the clutch assembly by yourself. Contact our company or our
dealers to shoot the troubles marked with ※
Symptom
The clutch fails
to clutch
Skid around (after loosening the
clutch, the diesel engine runs
normally, but the main shaft of the
transmission shaft stops running or
runs slowly)
Ⅲ. Troubleshooting of Gear-box
Symptom
Failure of fast, slow and
neutral shift
Failure to shift to the right Excess abrasion of puller
17
WWW
Cause
Failure of the clutch handle
Damage of the clutch Cables
Fork not in the right position
Welding points between fork shaft and
arm base break off
Fork pin is bent or broken
※ Malfunction of the friction piece
※ Malfunction of spring
The friction piece fails to touch the
bearing face of the clutch cover
Bearing is burnt in the clutch
※ The spring does not function due to
tiredness
Fork shaft's failure to turn around
freely makes the fork fail to reset
completely
Cable adjustment is not right
Cause
Bolts and nuts for the main shaft are loose
.N
AKAYAMA
Terms of settlement
Repair or replace
Replace
Re-adjust the cable or replace the fork
Repair or replace
Replace the fork pin
Replace
Replace
Add some adjustment pads to the back of
the bearing
Replace
Pay attention to refilling engine oil into
the gear-box
Replace
Clean the combined face between
positioning shaft and pushing plate to
make the fork move freely.
Re-adjust the clutch Cables.
Terms of settlement
Dismount the bolts, keys cover at the back
of the main shaft, screw the round nuts
tight, then fix back the bolts and keys
cover and screw them tight
Replace the puller
T
.
OOLS
COM
Advertisement
