Advertisement
Available languages
Available languages
handle bar support base, and insert it into the hole of the shift casing, then fix it with split pin
set the shifting bar in neutral position.
7. Assembly drawing of safety protection guard install.
1. BRACKET OF COLLISION BUMPER(LEFT)
2. BRACKET OF COLLISTION BUMPER(FRONT)
3. BOLT M8 (BG5781-86)
4. BRACKER OF COLLISION BUMPER(RIGHT)
5. NUT M8(GB41-86)
6. SPRING WASHER ￠8(GB93-87)
7. WASHER ￠8(GB95-85)
8. STAND (DIESEL)
9. BRACKET(RIGHT)
10.
NUT M6(GB41-86)
11.
SPRING WASHER ￠6(GB93-87)
12.
WASHER ￠6(GB95-85)
13.
BOLT M6×10(GB5781-86)
14.
FENDER FOR PADDY FIELD (RIGHT)
15.
FIXTY OF SAFETY PROTECTION GUARD
16.
SAFETY PROTECTION GUARD(RIGHT)
17.
SAFETY PROTECTION GUARD(LEFT)
18.
FENDER FOR PADDY FIELD(LEFT)
19.
DOWEL
20.
CONNECTING PLATE
21.
BOLT M8×50(GB5781-86)
22.
CONNECTOR JOINTING ASSEMBLY
23. DEEP FURROWING RESISTANCE STICK
24.
BOLT M8×25(GB5781-86)
25.
BULLING SET (TROUGH COMP 16mm)
26.
BRCRET OF FENDER COMP
27.
BRACKET (LEFT)
3.2 ×16.
￠
Advertisement
