Advertisement
Available languages
Available languages
Ⅲ Check and Refueling
1. Check whether all the connection bolts are loose or not, and fix the connection
bolts according to the moment of force listed in table 3. (Refer to the
instruction manual for diesel engine for the screwing moment of force bolt
and nut respectively)
Name of parts
Flange and the diesel engine
Flange and the gear-box
Binding bolts of end of driving shaft of gear-box
Binding bolts of reversing gear shaft of gear-box
Binding bolts between engine support and traveling mechanism
Binding bolts of cover of the traveling mechanism
Binding bolts of trailer of the traveling mechanism
Connection bolts between traveling mechanism and gear-box
Trailer unit
Set bolts of the diesel engine base
Set bolts of the handle support base
2. Check each handle of the manipulation system (throttle switch, clutch,
shifting bar and reversing bar) to see whether they can move freely or not. If
they are out of the right positions, make them at the
right positions.
3. Pull shift bar of the gear-box to the neutral position.
4. Refilling the engine oil
① Refill the SAE10W-40 lubricant into the
crankcase of
the diesel engine. See Figure 9 for details.
② Make the whole machine stable and horizontal,
and
refilling 20 # lubricant engine oil into the gear-box from oil
hole at the top of the gear-box .when check the oil level, put
the oil dipstick into the oil .(Note: not to turn the dipstick around), the oil level should
be between the two limits of the
oil dipstick. (refer to figure 8)
Knock down the lower cover of the air cleaner, refill about 0.1 litre 20#
①
4
WWW
.N
AKAYAMA
Moment of force (N.M)
20-25
35-40
10-12
26-40
35-40
10.6-15
50-60
35-40
45-60
35-40
35-40
T
.
OOLS
COM
Advertisement
