Advertisement
Available languages
Available languages
6. Please pay attention to warning signs
Chapter Four Maintenance & Service Method of power
During the working period of the power tiller, due to the change of running, abrasion
and loading, phenomena of bolts loosening and parts wearing are inevitable, these
phenomena lead to the malfunction of the system, abnormalities of clearances,
declination of engine power, more oil consumption, malfunction of each part, more
failures of the machine, and the problems affect the normal use of the power tiller. To
reduce chances of troubles, it is better to do a strict and regular maintenance job which
emphasizes precaution to keep a good performance and extend its working life.
Ⅰ. Breaking-in
1.
Refer to the instruction manual for the breaking-in of the diesel engine
2. As for a new or overhauled power tiller, it should be working for 1 hour under no
load or 5 hours under light load, then drain all the lubricant from the gear-box and
crankcase of the diesel engine, refill appropriate fix of clean diesel, and clean them
at a slow speed for 3-5 minutes, then drain the diesel off. Refill engine oil into them
according to 4/Clause Three / Chapter Ⅲ to enter four hours breaking-in, then the
machine can work.
Ⅱ Maintenance and storage.
1. Keep all nuts, bolts and screw tight to ensure the equipment is in safe working
condition.
2. Never store the equipment with diesel in the tank inside a building where fumes can
reach an open flame or spark.
3. Allow the engine to cool before storing in any enclosed place.
12
WWW
tiller
.N
AKAYAMA
T
.
OOLS
COM
Advertisement
