Siemens VersiCharge 8EM1310-F.0 Series Operating Instructions Manual page 9

Areas of application of the device
• Charging electrically operated vehicles in public and semi-public areas
• Charging stations for depots, car parks, public parking areas, and retail
• Stations for car-to-go projects
Intended use
The device is used to charge batteries in fully electric and plug-in hybrid vehicles. The Wallbox
can be used indoors and outdoors.
Charge electric vehicles according to IEC 61851-1. Any other use or use that goes beyond the
use described here is not intended and represents a misuse of the device.
According to the product liability act, you are obliged to prevent any predictable,
unreasonable or improper use of the device.
NOTE
The wallbox can only be used for kWh billing compliant with calibration laws.
Expiration of the manufacturer's warranty due to unauthorized modifications to the device
Modifications to the device are not permitted. Non-compliance will void the manufacturer's
warranty and invalidate the approvals.
Unauthorized opening of the device
Risk of electric shock
Only qualified personnel may open the device. Unauthorized persons risk causing
considerable property damage, serious injuries, or death.
Qualified personnel
All activities, apart from use, are to be performed by qualified personnel. Due to their
training, experience and instruction, such people have knowledge of the following topics:
• Relevant standards and regulations
• Accident prevention regulations
They are authorized to perform the necessary activities and to detect and prevent possible
dangers.
Personal protective equipment
Avoid accidents and hazardous situations. Use your personal protective equipment according
to the activity you are performing, such as safety goggles, gloves, safety shoes.
VersiCharge AC Wallbox Operating Instructions ERK
Operating Instructions, 08/2023, A5E51549696-AC
Safety information
2.1 General safety information
9