Single mounting on a post
1.1
Introduction
This flyer provides installation instructions for mounting a VersiCharge Wallbox on a post. The
post is not included in the scope of delivery from Siemens.
1.2
Safety instructions
See Installation instruction no. A5E51460471-AA
1.3
Preparation
The Wallbox can be secured individually to a post.
The corresponding mounting set must be ordered separately.
Round posts up to d=70 mm and square posts up to 70x70 mm are suitable for mounting.
The post material should consist of at least zinc-coated steel with a wall thickness > 2 mm
and be connected to the grounding system in accordance with the applicable technical
guidelines. For this purpose, the post must have an M12 grounding bolt.
Mounting on wooden posts or similar is not permitted.
1.4
Scope of delivery
①
Fastening clip top
②
Fastening clip bottom
③
Protective cover
④
Protective tube
⑤
Heat-shrink tube
⑥
Lock nut
⑦
Tube connection
Figure 1-1
Mounting set
4
VersiCharge mounting on posts
Brochure, 02/2022, A5E51701924-AA
1