Siemens VersiCharge 8EM1310-F.0 Series Operating Instructions Manual page 49

Configuring a mobile wireless connection
When using SIM cards from third-party providers, follow these instructions:
1. You can use a micro or nano SIM card with an adapter. Make sure that the PIN request is
disabled.
2. The SIM card slot is spring-loaded. Slide the SIM card into the slot until it stays in place. To
remove/replace the SIM card, press the SIM card which will pop out of the slot.
①
To set up a SIM card from a third party, you need the following information from the
provider:
• Dial-up number (modem dial string)
• Access Point Name (APN)
• If appropriate, password and user name
NOTE
Activate SIM card
SIM card must be activated before insertion.
NOTE
Devices that are delivered with a factory-fitted SIM card (8EM131x-xxxxx-3xx2) require the
following parameters to establish a connection to the Siemens Device Management System:
• Modem dial string: *99#
• APN: cu.siemens.global
• Password and user name are not required
VersiCharge AC Wallbox Operating Instructions ERK
Operating Instructions, 08/2023, A5E51549696-AC
SIM card slot
5.2 Notes on setting up the communication connection
Commissioning
49