Conair W Series User Manual page 65

C o n t r o l F u n c t i o n D e s c r i p t i o n s
S c r e e n
SCREEN 78
MODEL NUMBER
CP100
SCREEN 79
DRYER TYPE
STD
SCREEN 80
VOLTAGE FREQ
208 V 60 HZ
F u n c t i o n
This screen further defines the dryer type
to a model number. Based on the dryer
type, the selections on this menu will
EDIT
change. Your dryer should be configured
from the factory. However, if the controls
were changed from one machine to another
type of machine, the control may need to
be reconfigured. With the proper
password, (see page 4-31, screen 85) the
Model Number can be changed by
pressing the Select Category button under
the word Edit. The "ENTER" key must
be pressed to lock in the selection.
This screen is used to tell the control what
dryer it is controlling. The selections are
Standard, Central or 1 Hopper MDC. Your
EDIT
dryer should be configured from the
factory. However, if the controls were
changed from one machine to another type
of machine, the control may need to be
reconfigured. With the proper password,
(see page 4-31, screen 85) the dryer type
can be changed by pressing the Select
Category button under the word Edit. The
"ENTER" key must be pressed to lock
in the selection.
This screen defines the voltage and
frequency at which the dryer will be
running. This setting should match the
electrical label on the side of the control
EDIT
box. Your dryer should be configured from
the factory. However, if the controls were
changed to run on another voltage, this
screen may need to be reconfigured. With
the proper password, (see page 4-31,
screen 85) the Voltage Freq can be
changed by pressing the Select Category
button under the word Edit. The
"ENTER" key must be pressed to lock in
the selection.
( c o n t i n u e d )
O p e r a t i o n l 4 - 2 9