Conair W Series User Manual page 59

C o n t r o l F u n c t i o n D e s c r i p t i o n s
S c r e e n
SCREEN 56
MONDAY START TIME
ON 8:00 AM
SCREEN 57
MONDAY STOP TIME
ON 8:00 PM
i
NOTE: If you purchased the
DM-II (Drying Monitor Option),
there will be additional screens
present in this area. See the
DM-II Appendix for information
pertaining to the control func-
tion descriptions for the DM-II.
F u n c t i o n
This is the auto start screen for the first
day of the week. Each day has a screen
similar to this. By pressing the Select
Category button under On or Off, the dryer
can be set to start on Monday. The start
time can be set by pressing the Select
Category button under time and entering a
new time on the numeric keypad. The AM
/ PM can be changed only after a time
value has been entered. The (+) button
will set PM and the (-) button will set AM.
The "ENTER" key must be pressed to
lock in the new time. The dryer can be
manually started at anytime. If the auto
start time runs out and the dryer has been
manually started nothing will happen.
This is the auto stop screen for the first
day of the week. Each day has a screen
similar to this. By pressing the Select
Category button under On or Off, the dryer
can be set to stop on Monday. The stop
time can be set by pressing the Select
Category button under time and entering a
new time on the numeric keypad. The AM
/ PM can be changed only after a time
value has been entered. The (+) button
will set PM and the (-) button will set AM.
The "ENTER" key must be pressed to
lock in the new time. If the auto stop time
runs out and the dryer has already been
manually stopped nothing will happen. If
the dryer was auto started on Monday
morning and the Monday auto stop is set
to off, the dryer will continue running until
it hits a day of the week when the auto
stop is set to On. At that time the dryer
will turn off.
( c o n t i n u e d )
O p e r a t i o n l 4 - 2 3