To Stop Drying - Conair W Series User Manual

4 - 3 6 l O p e r a t i o n
To S t a r t D r y i n g
4
Press the START button.
If everything is installed correctly:
•
The green light on the start button will illuminate.
•
The process and regeneration blowers turn on and the display LEDs
will illuminate.
•
The process and regeneration heaters turn on and the display LEDs will
illuminate.
•
The desiccant wheel starts turning.
•
The green light on the start button will illuminate.
•
The process and regeneration blowers turn on and the
display LEDs will illuminate.
•
The regeneration heater turns on and the display LED will
illuminate.
Central
•
The desiccant wheel starts turning.
To S t o p D r y i n g
1
Press the STOP button. The Stop LED blinks red.
•
The blowers continue running for a few
minutes to cool the heaters.
2
Be sure to disconnect and lockout the
main power if you have stopped the dryer
to perform maintenance or repair.
IMPORTANT: Do not use the main power switch
to stop the dryer. Turning off power to the control
and dryer during normal operation prevents the
necessary cool-down period, and can trigger the
shutdown/high temperature alarm during your next
drying cycle.
Caution: Improper shut down can cause damage to your dryer.
( c o n t i n u e d )
Start
Stop