Conair W Series User Manual page 64

i
NOTE: Screens labeled 75 in
the display screen flow chart
on page 4-9 are various
option installation screens.
4 - 2 8 l O p e r a t i o n
C o n t r o l F u n c t i o n D e s c r i p t i o n s
S c r e e n
SCREEN 74
DRYER SETUP OTHER
OPT INSP COM
SCREEN 75
CFM MONITOR
NOT INSTALLED
SCREEN 76
PROCESS CURRENT
5 A
SCREEN 77
PROCESS CURRENT SCALE
1
F u n c t i o n
This is the Dryer Setup Other screen. It
can be found by pressing the Select
Category button under the word Other on
PW
the Dryer Setup Screen (36). By pressing
the Select Category buttons under the
titles, the user can select to see setup
information for Options, Inspection,
Communications, or Password.
This is an example of an Option
Installation screen. With the proper
password (see page 4-31, screen 85) and
EDIT
hardware installed, an option can be turned
on by pressing the Select Category screen
under the word Edit. This will change an
option from Not Installed to Installed. The
"ENTER" key must be pressed to lock in
the change. Once an option is installed,
there may be additional screens that show
in the menu structure that need to be setup.
Please reference the option installing
section of this manual.
This screen is used with the current
monitor option and tells the control which
TAP
tap is used on the current sensing board
(5A, 10A, or 15A).
This screen is used with the current
monitor option and is used to properly
scale the reading.
( c o n t i n u e d )