Conair W Series User Manual page 15

Ty p i c a l A p p l i c a t i o n s
Model
Low temperature (with precooler)*
Standard
High heat (with aftercooler)*
Low-high (with aftercooler & precooler)*
* See page 3-12 and Appendix B.
•
Throughput rates of 15 to 100 lbs {6.8 to 37.3} per hour (some materials
can be ran at a higher rate).
•
Dewpoints of -40°F {-40°C}.
Use the aftercooler when:
•
You are drying at temperatures over 240°F {116°C}.
•
Throughput rates are less than 50% of the dryer's rated capacity.
•
You are pre-drying material at temperatures over 150° F {66°C}.
Dryer Standard Features:
•
Audible and visual alarm
•
Temperature setback
•
Dewpoint monitor/dewpoint control
•
DeviceNet communications (Alternate communications are
available: Modbus, SPI and Ethernet)
( c o n t i n u e d )
Drying Temperature Range
100° - 150°F {38° - 66°C}
150° - 240°F {66° - 116°C}
150° - 375°F {66° - 191°C}
100° - 375°F {38° - 191°C}
Central
When supplied for central drying
applications, the W Series Dryer
is not equipped with a process
heater. Therefore, as a central
dryer, the W dryer will only
supply dry air to the hoppers.
D e s c r i p t i o n l 2 - 3