Conair W Series User Manual page 159

S u p p o r t e d D r y e r S P I C o m m a n d s
( c o n t i n u e d )
8. Status, Machine 2 - This word shows the status of the Dryer itself with each bit
showing a particular condition.
The "bits" are defined as follows:
Bit0 - Processing (dryer running)
Bit1 - Alarm, System (any alarm that indicates a problem that may affect the
drying operation)
Bit2 - Alarm, Process (any alarm that indicates a problem with the process itself)
Bit3 - Alarm, Machine (any alarm that indicates a problem with the dryer itself)
Bit4 - Fault Sensor
Bit5 - Fault, Calibration
Bit6 - Reserved
Bit7 - Reserved
Bit8 - Reserved
Bit9 - Reserved
Bit10 - Reserved
Bit11 - Reserved
Bit12 - Reserved
Bit13 - Reserved
Bit14 - Reserved
Bit15- Reserved
Select: NA Poll: 20h, 44h
(continued)
S P I C o m m u n i c a t i o n s l D - 7