Psus; Fan Modules - xFusion Digital Technologies FusionServer 5288 V7 Manual

FusionServer 5288 V7 Server
Technical White Paper

5.8 PSUs

●
●
●
●
●
●
●
●

5.9 Fan Modules

●
●
●
●
●
Issue 01 (2023-07-20)
– Windows OS: After installing the pci-utils package, run the lspci command
to obtain the B/D/F information of the server.
– VMware OS: The lspci command is supported by default. You can directly
obtain the B/D/F information of the server using the lspci command.
Supports one PSU or two PSUs.
Supports AC or DC PSUs.
Supports hot swap.
When two PSUs are configured, 1+1 redundancy is supported.
PSUs of the same P/N code must be used in a server.
Short-circuit protection is provided, and bipolar fuses are provided for PSUs that
support dual live wire input.
If you want to use a DC power supply, purchase a DC power supply that meets
the requirements of the safety standards or a DC power supply that has passed
the CCC certification.
For details about the optional components, consult the local sales representative
or see "OS and Parts Compatibility" in the
Figure 5-48 Positions of PSUs
Supports four fan modules. Fan modules 1 and 4 each contain one fan, and fan
modules 2 and 3 each contain two fans (one upper and one lower). There are six
fans in total.
Supports hot swap.
Supports N+1 redundancy. The server runs properly when one fan fails.
Supports intelligent fan speed adjustment.
Fan modules of the same part number (P/N code) must be used in a server.
Copyright © xFusion Digital Technologies Co., Ltd.
5 Hardware Description
Compatibility Checker.
88