xFusion Digital Technologies FusionServer 5288 V7 Manual page 19

FusionServer 5288 V7 Server
Technical White Paper
Silkscreen
Issue 01 (2023-07-20)
Indicator and
Button
UID button/
indicator
iBMC direct
connect
management
port indicator
Copyright © xFusion Digital Technologies Co., Ltd.
Description
The UID button/indicator helps identify and
locate a device.
UID indicator:
● Off: The device is not being located.
● Blinking or steady blue: The device is being
located.
UID button:
● You can control the UID indicator status by
pressing the UID button or using the iBMC.
● You can press this button to turn on or off the
UID indicator.
● You can press and hold down this button for 4
to 6 seconds to reset the iBMC.
Indicates the status when the iBMC direct
connect management port connects to a
terminal (local PC or Android mobile phone):
● Off: No terminal is connected.
● Blinking green at short intervals for 3 seconds
and then off: The port is disabled.
● Steady green: The terminal is connected.
Indicates the status when the iBMC direct
connect management port connects to a USB
device:
● Blinking red at long intervals: The job fails or
an error is reported when the job is complete.
● Blinking green at short intervals: The job is
being executed.
● Blinking green at short intervals for 3 seconds
and then off: The port is disabled.
● Steady green: The server configuration file is
being copied from the USB device or the job
is successfully completed.
5 Hardware Description
12