Raid Controller Card; Network; Ocp 3.0 Nics - xFusion Digital Technologies FusionServer 5288 V7 Manual

FusionServer 5288 V7 Server
Technical White Paper
●

5.5.3 RAID Controller Card

The RAID controller card supports RAID configuration, RAID level migration, and
drive roaming.
●
●

5.6 Network

5.6.1 OCP 3.0 NICs

OCP 3.0 NICs provide network expansion capabilities.
●
●
Issue 01 (2023-07-20)
Activity
Indicator
(Green)
Off
Steady on/Off
If the VMD function is disabled, the E1.S drive supports only orderly hot swap.
Table 5-19 E1.S drive indicator description (VMD function disabled)
Activity
Indicator
(Green)
Off
Steady on
Blinking at 2 Hz
Off
Off
Steady on/Off
For details about the optional components, consult the local sales representative
or see "OS and Parts Compatibility" in the
For details about the RAID controller card, see the
Card User Guide.
The FlexIO slot supports an OCP 3.0 NIC, which can be configured as required.
For details about the optional components, consult the local sales representative
or see "OS and Parts Compatibility" in the
Copyright © xFusion Digital Technologies Co., Ltd.
Fault Indicator Description
(Yellow)
Blinking at 8 Hz Data on the secondary E1.S drive is
being rebuilt.
Steady on The E1.S drive is faulty.
Fault Indicator Description
(Yellow)
Off The E1.S drive is not detected.
Off The E1.S drive is detected and
operating properly.
Off Data is being read from or written to
the E1.S drive.
Blinking at 2 Hz The E1.S drive is being located or
hot-swapped.
Blinking at 0.5 Hz The E1.S drive has completed the hot
swap process and is removable.
Steady on The E1.S drive is faulty.
5 Hardware Description
Compatibility Checker.
V7 Server RAID Controller
Compatibility Checker.
82