xFusion Digital Technologies FusionServer 5288 V7 Manual page 111

FusionServer 5288 V7 Server
Technical White Paper
Category
Network
I/O expansion
Port
Issue 01 (2023-07-20)
Specifications
– The PCIe RAID controller card occupies one PCIe
For details about the RAID controller card, see the
Server RAID Controller Card User
NOTE
If the BIOS is in legacy mode, the 4K drive cannot be used as
the boot drive.
OCP 3.0 NICs provide network expansion capabilities.
● Supports two OCP 3.0 NICs, which can be configured
as required.
● Supports orderly hot swap.
NOTE
● Supports a variety of OCP 3.0 NICs. For details, see
"Search Parts" in the
Supports two OCP 3.0 NIC dedicated slots and ten
standard PCIe slots.
For details, see
Description.
NOTE
The preceding information is for reference only. For details, see
"Search Parts" in the
Supports a variety of ports.
● Ports on the front panel:
– One USB Type-C iBMC direct connect
– Two USB 3.0 ports
– One DB15 VGA port
● Ports on the rear panel:
– Two USB 3.0 ports
– One DB15 VGA port
– One RJ45 serial port
– One RJ45 management network port
● Built-in ports:
– One USB 2.0 port
– Two SATA ports
NOTE
You are not advised to install the OS on the USB storage media.
Copyright © xFusion Digital Technologies Co., Ltd.
slot.
The OCP 3.0 NIC supports orderly hot swap only when the
VMD function is disabled.
Compatibility
5.7.2 PCIe Slots
Compatibility
management port
6 Product Specifications
Guide.
Checker.
and 5.7.3 PCIe Slot
Checker.
V7
104