xFusion Digital Technologies FusionServer 5288 V7 Manual page 68

FusionServer 5288 V7 Server
Technical White Paper
Configuratio
n
● a: The I/O module (2 x 2.5") is configured with the module with 2 x 2.5" rear
● b: Four NVMe drives are supported when CPU 2 is configured. A single-CPU
● For details about the optional components, consult the local sales
Drive Numbering
The drive numbers identified by the RAID controller card vary depending on the
cabling of the RAID controller card. This section uses the drive numbers identified by
a RAID controller card that adopts the default cabling described in "Internal Cabling"
in the FusionServer 5288 V7 Server Maintenance and Service Guide.
●
Issue 01 (2023-07-20)
Front Drive
drives and one PCIe riser card.
server does not support NVMe drives.
representative or see "OS and Parts Compatibility" in the
Checker.
NO TICE
Drive numbering of the dual-RAID configuration 1 in
Copyright © xFusion Digital Technologies Co., Ltd.
Rear Drive Built-in Drive
support
only
SAS/
SATA
drives.
5 Hardware Description
Drive
Management
Mode
● E1.S drive:
CPU pass-
through
Compatibility
Table 5-11
61