Table of Contents
Advertisement
FusionServer G5500 V7 Server
Technical White Paper
Server Bus/Device/Function Number (B/D/F) Information
The B/D/F information of the server may change with PCIe card configurations. You
can obtain the B/D/F information of the server using the following methods:
●
●
●
5.8 PSUs
●
●
●
●
●
●
●
●
Issue 02 (2023-12-13)
BIOS serial port log: If the serial port log has been collected, you can query the
B/D/F information of the server by searching for the keyword dumpiio.
UEFI Shell: You can obtain the B/D/F of the server running the pci command.
Run the help pci command to obtain the specific usage of the pci command.
The following describes how to obtain the B/D/F information on different OSs.
–
Linux OS: You can obtain the B/D/F information of the server running the
lspci -vvv command.
NO TE
If the OS does not support the lspci command by default, obtain the pci-utils
package from the yum source and install it to make the OS support the command.
–
Windows OS: After installing the pci-utils package, run the lspci command
to obtain the B/D/F information of the server.
–
VMware OS: The lspci command is supported by default. You can directly
obtain the B/D/F information of the server running the lspci command.
The server supports a maximum of four PSUs.
The server supports AC PSUs.
The PSUs support hot swap.
The PSUs support 2+2 redundancy or 3+1 redundancy when four PSU are
configured.
PSUs of the same P/N code must be used in a server.
The PSUs are protected against short circuit. Double-pole fuse is provided for
the PSUs with dual input live wires.
Power consumption parameters vary with server configurations (including ErP-
standard configurations). For details, see
Calculator.
For details about the optional components, consult your local sales
representative or see "Search Parts" in the
Figure 5-26 Positions of PSUs
Copyright © xFusion Digital Technologies Co., Ltd.
5 Hardware Description
FusionServer Servers Power
Compatibility
Checker.
49
Advertisement
Table of Contents
