General Workflow For Using Media - Canon Colorado M Series Operation Manual

General workflow for using media

Introduction
Use the following workflow to handle the media correctly.
Step Action
Configure media in the RIP on page
1
manage the profiles in the RIP.
Prepare media for printing on page
2
core on the roll winder and calibrate your media.
Print with or without winding on page
3
take-up roll core to wind media, with or without a tension bar.
Cut and unload media on page
4
the media drawer.
44. Download and install a media profile, and
89. Load a media roll in the media drawer, a
125. Print without winding or tape media to the
153. Cut media and unload a roll from the winder and
General workflow for using media
Chapter 4 - Handle the media 43