About This Guide - Canon Colorado M Series Operation Manual

About this guide

About this guide
This guide is written for worldwide markets. It may contain information related to accessories or
licensed functionalities not supported by your local Canon organization or dealer.
Language
Original instructions are in English.
Introduction
The guide addresses the Colorado M-series and is written for the printer operator.
It describes the complete workflow of the printer: from setup to the operation, maintenance and
troubleshooting of the machine.
Process
Before using the sys‐
tem
Daily use
Maintenance
Network and security
Troubleshooting
Operator skill level
This guide describes safeguards for the protection of an instructed person. Instructed person is a
term applied to persons who have been instructed and trained by a skilled person, or who are
supervised by a skilled person, to identify energy sources that may cause pain and to take
precautions to avoid unintentional contact with or exposure to those energy sources.
10 Chapter 1 - Introduction
Actions
Components of the printer
Use the RIP software
Load, wind, and cut media
Print a job
Improve quality
Maintain the print quality
Maintain the rest of the printer
Network and security options
Clear jams, stop the printer
Clean polluted parts
Reference
Explore the system on page 33
Configure media in the RIP on
page 44
Handle the media on page 41
Print a job on page 167
Improve quality on page 249
Maintain the print quality on
page 176
Maintain the printer on page 210
Configure the network and security
settings on page 259
General troubleshooting on
page 316
Clean pollution on the printer on
page 354